XTR 0 Trowel #0
- For installation of leveling compounds
XTR 1 Trowel #1
- For installation of flooring with flat backing or lightly structured
XTR 2 Trowel #2
- For installation of carpet with structured backing or on rough subfloors
XTR 3 Trowel #3
- For installation of parquet flooring
XTR 4 Trowel #4
- For installation of solid wood flooring
XTR 5 Trowel #5
- For installation of engineered wood flooring
XTR 6 Trowel #6
- For unitary and double glue installations
XTR 7 Trowel #7
- For installation of woven propylene
XTR 8 Trowel #8
- For installation of vinyl, cushion, and carpet tile
XTR 9 Trowel #9
- For installation of VCT, LVT, LVP, SVP, sheet vinyl, rubber, and carpet with vinyl backing over non-absorbent subfloors or moisture barriers
XBL10 Blades (10 count)
- Blades for Sealers
- Use with XTH22 or XTH24 blade handle
XBL11 Blades (10 count)
- Blades for Urethane Leveling Compounds
- Use with XTH22 or XTH24 blade handle
XBL12 Blade #12 (25 count)
- For spreading adhesives as sound and/or moisture barrier
- Use with any standard trowel
XTR13 Trowel #13
- For installation of VCT and asphalt tile over non-porous subfloors
XTR14 Trowel #14
- For installation of engineered floors when both the flooring and subfloor are flat
XTR15 Trowel #15
- For installation of underlayment under wood flooring
- For installation of sports and rubber flooring
- For installation of wall and cove base
XBL16 Blades (10 count)
- Blades for Cementitious Leveling Compounds
- Blades for Gypsum Leveling Compounds
- Use with XTH22 or XTH24 blade handle
XTR17 Trowel #17
- For installation of wide solid planks
XTR18 Trowel #18
- For installation of sheet vinyl over non-porous subfloors
XTR19 Trowel #19
- For installation of broadloom with polyurethane cushion
XTH20 Trowel Handle
- For spreading STAUF ESD adhesives
- Requires blade inserts XBL10-ESD or XBL11-ESD
XTH22 Trowel Handle
- For spreading STAUF Leveling Compounds and Epoxies
- Requires XBL10 or XBL11 or XBL16 blade inserts
XTH24 Trowel Handle
- For spreading STAUF Sealers and Leveling Compounds
- Requires blade inserts XBL10, XBL11, or XBL16
