- Pours in place over existing concrete floors
- Provides chemical resistance including grease and oils.
- Creates impenetrable barrier
- Can be cleaned with most high pressure systems including steam cleaning
- Suitable for garages, commercial kitchens, and examination rooms
- Suitable for high traffic areas that require repeated cleaning frequently
- Maintains a compression strength of over 14,000 psi
Resinous Floor Coatings
Overview of resinous floor coatings
CCI-600 Aria Pro
Epoxy Coating Base Coat
- Special formulation for thicker coats
- Can be tinted and/or flaked
CCI-610 Summit
Interior Epoxy Coating Top Coat
- Special formulation for thin coats
- Clear hardener
- Can receive anti-skid additives
CCI-620 Aria White
Epoxy Coating Base Coat
- Pre-colored for white coats
- Special formulation for thicker coats
- Suitable for airplane hangars
CCR-630 Quikote
Water Based Epoxy Coating
- Economic coat for warehouse flooring
- Can be tinted (except in light colors) and/or flaked
- Provides a dust-free and easy clean surface
CCO-640 Aria Rapid UV
Urethane (Polyaspartic) Base Coat
- Fast drying
- Exceptional slip-resistance with sand broadcast
- UV stable
- Can be tinted and/or flaked
CCO-650 Summit Pro Rapid
Urethane (Polyaspartic) Top Coat
- Fast drying
- UV resistant
- Hot tire resistant
- Chemical resistant
CCO-651
Polyurethane Top Coat for FULL flake/quartz ONLY
- UV resistant
- Hot tire resistant
- Chemical resistant
CCO-652
Polyurethane Top Coat
- UV resistant
- Hot tire resistant
- Chemical resistant
- Color enhancing
- 100% solids
DWS-660 Seal UV
One Component Water-Based Sealer
- Seals and protects indoor and outdoor concrete
- UV and limited chemical resistance
UPS-670 Vari-Seal UV
Universal Protective Sealer
- Two-part urethane clear coat
- Seals and protects indoor concrete
- UV and chemical resistant
XCF ColorFast Tint
Concentrated Tint for Coating Systems
- Additive for epoxy and urethane coatings
- Additive for urethane leveling compounds
- Pre-measured quantities
XPF Polymer Flakes
Colored Flake Chips
- Colored Flakes for epoxy and urethane coatings
- Solid Colors and Blends available
- See www.colorflakes.com for more choices
XTC-S Texturing Compound
Texturing Compound for Resinous Floor Coatings
- Creates non-slip surface
- Pre-measured quantities
- Based on SIO2
- Suitable for vehicular traffic
- Thin coats only
XTC-P Texturing Compound
Texturing Compound for Resinous Floor Coatings
- Creates non-slip surface
- Pre-measured quantities
- Based on Polypropylene
- Suitable for indoor and outdoor
- Stays suspended
ULC-500 LevelSeal
Two-Component Self-Leveling Compound
- Will withstand any moisture
- Moisture barrier up to 18# or 97% RH
- Can be applied in any thickness over 1/32"
- Cures in under 4 hours
EHS-265 Hydro-Seal
Water-Based Epoxy Primer (Two-Component Pail)
- For use under ULC-500 and coatings
- Superb penetration of subfloors
- Increases bond of subsequent products
ECP-280 Isolator
Oil Barrier Over Concrete
- Encapsulates oil residues in concrete
- Can be used under any urethane levelers and adhesives
- Can be used under epoxy and urethane coatings
